Jobs in Inspection companies, Saudi Arabia

Role: Mechanical InspectorLocation: Jeddah, Saudi ArabiaProject Type: Infrastructure / Mega Community / Mixed-Use DevelopmentProject Duration: Long-TermRole SummaryHandling the inspections for Chilled Water (welding), Irrigation, Potable & Firefighting, Wastewater, Stormwater in infrastructure and HVAC, Firefighting, and Plumbing services in the service buildings.Required QualificationsDiploma in Mechanical Engineering or Bachelor's in Mechanical Engineering with a minimum of 10 years of experience, including 6 years of experience in Quality Inspection.CSWIP 3.1 Certification or CWI or equivalent (mandatory)Key ResponsibilitiesInspect welding works in accordance with approved WPS, ITPs, drawings, and project specificationsEnsure compliance with applicable codes and standards (AWS, ASME, ISO, etc.)Verify welder qualifications and welding procedures prior to executionConduct visual inspections before, during, and after welding activitiesCoordinate with QC Engineers, Site Engineers, and Contractors to resolve welding-related issuesReview and verify NDT reports and follow up on corrective actionsMaintain accurate inspection records, reports, and documentationIdentify non-conformances and ensure timely corrective and preventive actionsEnsure adherence to HSE requirements during welding operationsThorough knowledge of ASME Standards.Experience Requirements

Job Description:We are seeking an experienced Mechanical Inspector with strong expertise in Infrastructure, MEP, and HVAC projects. The candidate will be responsible for inspecting mechanical works to ensure compliance with project specifications, quality standards, approved drawings, and applicable codes and standards.Key Responsibilities:Conduct inspections of mechanical installations related to Infrastructure, MEP, and HVAC systems.Ensure all work is executed in accordance with approved drawings, project specifications, and quality requirements.Monitor site activities and verify compliance with safety and quality standards.Review inspection reports, test reports, and related documentation.Coordinate with contractors, consultants, and project teams for inspection activities.Identify non-conformance issues and follow up on corrective actions.Witness testing and commissioning activities when required.Maintain proper inspection records and reports.

Job Title: TAB (Testing, Adjusting, and Balancing) Technician Job Location: Saudi Arabia Experience: 2+ years of relevant experience in the field of TAB Testing, Adjusting, and Balancing Notice period: Available to join immediately with a transferable Iqama in Saudi ArabiaJob Description Perform testing, adjusting, and balancing of HVAC systems to ensure optimal performance and energy efficiency.Conduct onsite inspections and measurements using various testing and balancing equipment.Calibrate and operate tools such as airflow meters, anemometers, manometers, and digital gauges.Analyze system performance data and identify issues or inefficiencies.Adjust dampers, valves, and other system components to achieve specified airflow, temperature, and pressure levels.Document testing procedures, results, and adjustments accurately for project records and reporting.Collaborate with contractors, engineers, and clients to ensure systems meet design specifications.Troubleshoot system problems and suggest corrective actions.Maintain testing and balancing equipment, ensuring proper calibration and safety standards.Ensure compliance with all safety regulations and industry standards.

QCI - Piping Requirements:Aramco approval with valid CBTMinimum 8 years overall experience (5+ years in Aramco projects)Certification: API 570 / CSWIP 3.1 or equivalentResponsibilities:Inspection of piping installation, fit-up, alignment, and hydrotestingReview of P&IDs, isometrics, and test packagesEnsure compliance with Aramco standards and project specificationsCoordination with construction and QA/QC teams for inspection activitiesQCI - WeldingRequirements:Aramco approval with valid CBTMinimum 8 years overall experience (5+ years in Aramco projects)Certification: CSWIP 3.1 / AWS-CWIResponsibilities:Monitor welding activities, fit-up, and joint preparationVerify WPS/PQR compliance and welder qualificationsConduct visual inspections and coordinate NDT activitiesEnsure adherence to Aramco welding standardsQuality Control Supervisor - WeldingRequirements:Aramco approval with valid CBTMinimum 8+ years overall experience with supervisory role in Aramco projectsCertification: CSWIP 3.2 / AWS-CWIResponsibilities:Supervise welding QC inspectors and site activitiesReview welding procedures, reports, and inspection recordsCoordinate with client representatives and project teamsEnsure quality compliance, reporting, and documentation control QCI - Painting / Coating Requirements:Aramco approval with valid CBTMinimum 8 years overall experience (5+ years in Aramco projects)Certification: BGAS / NACE Level 1 or 2 Responsibilities:Inspection of surface preparation and coating applicationMonitor environmental conditions and DFT measurementsEnsure compliance with coating specifications and proceduresPrepare inspection reports and documentationQCI - Electrical & InstrumentationRequirements:Aramco approval with valid CBT in Electrical & InstrumentationMinimum 8 years of overall experience (including 5+ years on Aramco projects)Responsibilities:Perform inspection of cable laying, glanding, termination, and testing activitiesVerify loop checking, calibration, and installation of instrumentsReview engineering drawings, datasheets, and test reportsEnsure all activities comply with Aramco standards and international codesCoordinate with construction and QA/QC teams for inspections and documentationMaintain proper inspection records and reports

Open Positions:✔️ QCI - PipingAramco approval with valid CBTMinimum 5 years of Aramco project experienceAPI 570 / CSWIP 3.1 or equivalent✔️ QCI - WeldingAramco approval with valid CBTMinimum 5 years of Aramco project experienceCSWIP 3.1 / AWS-CWI✔️ Quality Control Supervisor - WeldingAramco approval with valid CBT5+ years of supervisory experience on Aramco projectsCSWIP 3.2 / AWS-CWI with supervisory experience✔️ QCI - Electrical & InstrumentationAramco approval with valid CBT (Electrical & Instrumentation)Minimum 5 years of Aramco project experience✔️ QCI - Painting / CoatingAramco approval with valid CBTMinimum 5 years of Aramco project experienceBGAS / NACE Level 1 or 2

Positions open: Welding Inspector Location: Jeddah, Saudi Arabia Notice period: Immediately available to join with Transferable IqamaFreelancers are welcome to apply Desired Experience: Construction of Infrastructure/mega community projects/mixed-use projects Project Duration: Long-termEducation: Shall have at least a technical diploma in Mechanical Experience: Have ten (10) years of relevant industrial experience, including six (6) years’ experience in a given inspection specialty.Certification: CSWIP 3.1 or equivalent (Mandatory)Principal DutiesPerform “Hold” “Witness” and “Surveillance” inspections and tests at manufacturing facilities or construction sites to ensure compliance with COMPANY requirements and project specifications.Inspect material and equipment as applicable to ensure compliance with COMPANY requirements for proper handling, storage, and protection at COMPANY facilities and/or construction sites.Monitor Contractor’s Quality Systems, records, and Quality Personnel for compliance with requirements. Review and evaluate Contractor’s Quality document submittals Witness onsite and offsite material and installations tests for compliance with COMPANY standards. Record legibly and accurately all controversial and non- complying construction practices, materials and equipment and report to supervisor detailed potential problems for early resolution.Write inspection reports and initiate Non-Conformance Reports (NCRs), and Equipment Deficiency Investigation as needed.General Requirements Demonstrated thorough knowledge of applicable international standards.Demonstrated full working knowledge of quality system standards and methods. Fluent command of the English language (spoken and written). Good health and in excellent physical condition. Good working knowledge of standard PC workstation usage and basic Microsoft Office software suite. Has Quality Management awareness. Demonstrated working knowledge of applicable industry standards.

Will Be assigned as QC Inspector/ QC Engineer (Vendor Inspections)