Jobs in Inspection companies, Saudi Arabia

Role: Coating Inspector Location: Within Saudi Arabia (openings in multiple location)Project: PID / GISProject type: Upstream/Downstream/ Maintain PotentialClient: SAUDI ARAMCOScope:The incumbent will monitor and/or perform quality activities at all stages of projects. The incumbent will ensure contractor's work is in compliance with all applicable requirements including without limitation SAUDI ARAMCO engineering requirements, standards, procedures, specifications, and Schedule Q of the project contract. The incumbent will provide training to others as and when required. Duties may require physical exertion, working outdoors, confined spaces, high elevations, and remote work locations, and on or offshore.Principal duties:Perform "Hold", "Witness" and "Surveillance" inspections and tests at manufacturing facilities or construction sites to ensure compliance with SAUDI ARAMCO requirements and project specifications.Inspect material and equipment as applicable to ensure compliance with SAUDI ARAMCO requirements for proper handling, storage and protection at SAUDI ARAMCO facilities and/or construction sites.Monitor Contractor's Quality Systems, records and Quality Personnel for compliance with requirements.Review and evaluate Contractor's Quality document submittals.Witness on-site and off-site material and installations tests for compliance with SAUDI ARAMCO standards.Record legibly and accurately all controversial and noncomplying construction practices, materials and equipment and report to supervisor detailed potential problems for earlyresolution.Write inspection reports and initiate Non-Conformance Reports (NCRs), Worksheets (WSs) and Equipment Deficiency Report (EDRs) as needed.Minimum Requirements:B.S degree in Engineering in a respective inspection discipline with at least four (4) years of experience in relevant inspection discipline. OR two (2) years industrial/technical College along with BGAS/CSWIP or NACE.Diploma plus a minimum of eight (8) years of relevant inspection experience.Demonstrated thorough knowledge of applicable international standards.Demonstrated full working knowledge of quality system standards and methods Inspector shall demonstrate a thorough working knowledge and proven ability of all phases and types of critical coating (e.g. Epoxy, Fusion Bonded Epoxy (FBE), Baked Coating System or any other coating system for immersion service) applications and methods and recognized industry standards. The coating inspector shall be qualified to British Grade 1 or National Association of Corrosion Engineers (NACE) Level II Critical Coatings Certification. When welding of the material to be coated is required (e.g. double jointing of pipe), Certification Scheme for Welding and Inspection Personnel (CSWIP) Level I, or COMPANY approved equivalent is required.

Role: Instrumentation InspectorLocation: Within Saudi Arabia (opening in Multiple Locations)Project: PID / GISProject type: Upstream/Downstream/ Maintain PotentialClient: SAUDI ARAMCOBasic Functions:The basic function of the Project Inspectors is to perform inspection services to verify the quality EPC work during the course of the projects.ScopeThe incumbent will monitor and/or perform quality activities at all stages of projects. The incumbent will ensure contractor's work is in compliance with all applicable requirements including without limitation SAUDI ARAMCO engineering requirements, standards, procedures, specifications, and Schedule Q of the project contract. The incumbent will provide training to others as and when required. Duties may require physical exertion, working outdoors, confined spaces, high elevations, and remote work locations, and on or offshorePrincipal duties:Perform "Hold", "Witness" and "Surveillance" inspections and tests at manufacturing facilities or construction sites to ensure compliance with SAUDI ARAMCO requirements and project specifications.Inspect material and equipment as applicable to ensure compliance with SAUDI ARAMCO requirements for properhandling, storage and protection at SAUDI ARAMCO facilities and/or construction sites.Monitor Contractor's Quality Systems, records and Quality Personnel for compliance with requirements.Review and evaluate Contractor's Quality document submittals.Witness on-site and off-site material and installations tests for compliance with SAUDI ARAMCO standards.Record legibly and accurately all controversial and noncomplying construction practices, materials and equipmentand report to supervisor detailed potential problems for early resolution.Write inspection reports and initiate Non-Conformance Reports (NCRs), Worksheets (WSs) and EquipmentDeficiency Report (EDRs) as needed.Minimum RequirementsB.S degree in Engineering in a respective inspection discipline with at least four (4) years of experience in Mechanical inspection. OR two (2) years industrial/technical CollegeDiploma plus a minimum of eight (8) years of mechanical inspection experience.Demonstrated thorough knowledge of applicable international standards.Demonstrated full working knowledge of quality system standards and methodsInspector shall demonstrate a thorough working knowledge of the National Electric Code/NFPA 70, or equivalent standards. He shall also have working knowledge of electrical installations including materials, methods, specifications, and hazardous location identification for oil and gas or petrochemical industries. He must be NFPA 70 Certified or equivalent. He shall satisfy the requirements of a fully qualified Instrument Technician/ Engineer meeting the requirements laid out by the Instrument Society of America or the Institute of Measurement Control

Role: Project Quality Supervisor (Mechanical)Location: Within Saudi ArabiaProject: PID / GISProject type: Upstream/Downstream/ Maintain PotentialClient: SAUDI ARAMCOBasic FunctionThe basic function of the Project/Operation Quality Supervisor is to supervise all quality activities performed by inspectors.ScopeThe incumbent will supervise and monitor quality activities performed by inspectors. The incumbent will ensure that WORK is in compliance with all applicable requirements including without limitation SAUDI ARAMCO engineering requirements, standards, procedures, specifications, and Schedule Q of the project contract. The incumbent will provide training to others as and when required. Duties may require physical exertion, working outdoors, confined spaces, high elevations, remote work locations, and on or offshore.Duties & ResponsibilitySupervise all aspects of inspection disciplines and give WORK direction to all inspection personnel in the assigned groups or in the remotely located unitsEnsure adequately trained and certified personnel are available to meet the workloadEnsure that all WORK is completed according to all applicable codes and standards, and keep current of the latestdevelopments in inspection standards, codes, practices, procedures, methods and inspection equipment.Review/evaluate WORK quality assurance/quality control systems, as necessary, and ensure Inspection Report andRecords (hard copy and electronic databases) are compiled and maintainedMake frequent visits sites to resolve inspection related problems, or appraise adequacy of inspection servicesprovidedPerform root cause analysis, assessments, and recommend short and/or long-term remediesProvide technical support to resolve problems concerning inspection methods and procedures for completing WORK within the scope and intent of applicable codes and standards

Role: Electrical Inspector/ E & I Inspector Location: Within Saudi Arabia (opening in Multiple Locations)Project: PID / GISProject type: Upstream/Downstream/ Maintain PotentialClient: SAUDI ARAMCOBasic Functions:The basic function of the Project Inspectors is to perform inspection services to verify the quality EPC work during the course of the projects.ScopeThe incumbent will monitor and/or perform quality activities at all stages of projects. The incumbent will ensure contractor's work is in compliance with all applicable requirements including without limitation SAUDI ARAMCO engineering requirements, standards, procedures, specifications, and Schedule Q of the project contract. The incumbent will provide training to others as and when required. Duties may require physical exertion, working outdoors, confined spaces, high elevations, and remote work locations, and on or offshorePrincipal duties:Perform "Hold", "Witness" and "Surveillance" inspections and tests at manufacturing facilities or construction sites to ensure compliance with SAUDI ARAMCO requirements and project specifications.Inspect material and equipment as applicable to ensure compliance with SAUDI ARAMCO requirements for properhandling, storage and protection at SAUDI ARAMCO facilities and/or construction sites.Monitor Contractor's Quality Systems, records and Quality Personnel for compliance with requirements.Review and evaluate Contractor's Quality document submittals.Witness on-site and off-site material and installations tests for compliance with SAUDI ARAMCO standards.Record legibly and accurately all controversial and noncomplying construction practices, materials and equipmentand report to supervisor detailed potential problems for early resolution.Write inspection reports and initiate Non-Conformance Reports (NCRs), Worksheets (WSs) and EquipmentDeficiency Report (EDRs) as needed.Minimum RequirementsB.S degree in Engineering in a respective inspection discipline with at least four (4) years of experience in Mechanical inspection. OR two (2) years industrial/technical CollegeDiploma plus a minimum of eight (8) years of mechanical inspection experience.Familiar/ Knowledge with NCPCCI, NFPA 70, ICBO, SMACNA, Uniform Mechanical Code, NFPA 90A, ASHRAE. Demonstrated thorough knowledge of applicable international standards.Demonstrated full working knowledge of quality system standards and methods

Role: Mechanical InspectorLocation: Within Saudi Arabia (opening in Multiple Locations)Project: PID / GISProject type: Upstream/Downstream/ Maintain PotentialClient: SAUDI ARAMCOBasic Functions:The basic function of the Project Inspectors is to perform inspection services to verify the quality EPC work during the course of the projects.ScopeThe incumbent will monitor and/or perform quality activities at all stages of projects. The incumbent will ensure contractor's work is in compliance with all applicable requirements including without limitation SAUDI ARAMCO engineering requirements, standards, procedures, specifications, and Schedule Q of the project contract. The incumbent will provide training to others as and when required. Duties may require physical exertion, working outdoors, confined spaces, high elevations, and remote work locations, and on or offshorePrincipal duties:Perform "Hold", "Witness" and "Surveillance" inspections and tests at manufacturing facilities or construction sites to ensure compliance with SAUDI ARAMCO requirements and project specifications.Inspect material and equipment as applicable to ensure compliance with SAUDI ARAMCO requirements for properhandling, storage and protection at SAUDI ARAMCO facilities and/or construction sites.Monitor Contractor's Quality Systems, records and Quality Personnel for compliance with requirements.Review and evaluate Contractor's Quality document submittals.Witness on-site and off-site material and installations tests for compliance with SAUDI ARAMCO standards.Record legibly and accurately all controversial and noncomplying construction practices, materials and equipmentand report to supervisor detailed potential problems for early resolution.Write inspection reports and initiate Non-Conformance Reports (NCRs), Worksheets (WSs) and EquipmentDeficiency Report (EDRs) as needed.Minimum RequirementsB.S degree in Engineering in a respective inspection discipline with at least four (4) years of experience in Mechanical inspection. OR two (2) years industrial/technical CollegeDiploma plus a minimum of eight (8) years of mechanical inspection experience.Welding inspector AWS or CSWIP 3.1 certificate is mandatory Demonstrated thorough knowledge of applicable international standards.Demonstrated full working knowledge of quality system standards and methods

Role: Senior Project Quality Supervisor (Mechanical)Location: Within Saudi ArabiaProject: PID / GISProject type: Upstream/Downstream/ Maintain PotentialClient: SAUDI ARAMCOBasic FunctionThe basic function of the Sr. Project Quality Supervisor is to supervise all quality activities performed by inspectors in capital projects.ScopeThe incumbent shall supervise and monitor inspection and quality activities performed by inspectors at all stages of projects. The incumbent will ensure WORK is in compliance with all applicable requirements including without limitation SAUDI ARAMCO engineering requirements, standards, procedures, specifications, and Schedule Q of the project contract. The incumbent will provide training to others as and when required. Duties may require physical exertion, working outdoors, confined spaces, high elevations, remote work locations, and on or offshoreRoles & ResponsibilitySupervise all aspects of inspection disciplines and give WORK direction to all inspection personnel in the assigned groups or in the remotely located unitsEnsure adequately trained and certified personnel are available to meet the workloadAssure that all WORK is completed according to all applicable codes and standards, and keep current of the latest developments in inspection standards, codes, practices, procedures, methods and inspection equipment.Review/evaluate CONTRACTOR's quality assurance/quality control systems, as necessary, and ensure InspectionRecords (hard copy and electronic databases) are compiled and maintainedMake frequent visits to construction sites to resolve inspection related problems, or appraise adequacy of inspection services providedPerform root cause analysis, assessments, and recommend short and/or long-term remediesProvide technical support to Purchasing and Project Management in resolving problems concerning inspectionmethods and procedures for completing WORK within the scope and intent of applicable codes and standards

Role: Telecommunication Inspector Project: SAUDI ARAMCOScope:The incumbent will monitor and/or perform quality activities at all stages of projects. The incumbent will ensure contractor's work is in compliance with all applicable requirements including without limitation SAUDI ARAMCO engineering requirements, standards, procedures, specifications, and Schedule Q of the project contract. The incumbent will provide training to others as and when required. Duties may require physical exertion, working outdoors, confined spaces, high elevations, and remote work locations, and on or offshore.Principal duties:Perform "Hold", "Witness" and "Surveillance" inspections and tests at manufacturing facilities or construction sites to ensure compliance with SAUDI ARAMCO requirements and project specifications.Inspect material and equipment as applicable to ensure compliance with SAUDI ARAMCO requirements for proper handling, storage and protection at SAUDI ARAMCO facilities and/or construction sites.Monitor Contractor's Quality Systems, records and Quality Personnel for compliance with requirements.Review and evaluate Contractor's Quality document submittals.Witness on-site and off-site material and installations tests for compliance with SAUDI ARAMCO standards.Record legibly and accurately all controversial and noncomplying construction practices, materials and equipment and report to supervisor detailed potential problems for earlyresolution.Write inspection reports and initiate Non-Conformance Reports (NCRs), Worksheets (WSs) and Equipment Deficiency Report (EDRs) as needed.Minimum Requirements:B.S degree in Engineering in a respective inspection discipline with at least four (4) years of experience in relevant inspection discipline. OR two (2) years industrial/technical CollegeDiploma plus a minimum of eight (8) years of relevant inspection experience.Demonstrated thorough knowledge of applicable international standards.Demonstrated full working knowledge of quality system standards and methods

Analyze project Drawings, specifications, and other documentation to prepare detailed cost estimates.Research and source materials, labor, and equipment costs.Collaborate with contractors, subcontractors, and vendors to obtain accurate pricing.Prepare and present cost estimates to management and clients.Conduct risk analysis and prepare cost-benefit analysis reports.Develop and maintain cost databases and estimation models.Monitor and adjust estimates based on changing market conditions and price fluctuations.Ensure compliance with industry standards and regulations.Provide financial reporting and trending data for project management.

B.S degree in Engineering in a respective inspection discipline with at least four (4) years of experience in relevant inspection discipline. OR Two (2) years industrial/technical College Diploma plus a minimum of eight (8) years of relevant inspection experience.Holds a valid international certification as a welding inspector in AWS or CSWIP 3.1 (MUST).Resume reflected a good knowledge of applicable international standards.Resume reflected working knowledge of quality system standards and methods.Current / previous experience working with ARAMCO- PID/GIS division is an added advantage. Good Knowledge of QMS ISO 9001:2015 Candidates with Experience working on oil and gas project, especially in upstream and downstream projects OR Gas Projects or refinery projects or Pipeline projects.

Perform pre-commissioning and commissioning activities to ensure proper functioning of equipment and systems.Conduct tests and inspections to verify compliance with specifications and regulations.Troubleshoot and resolve issues related to testing and commissioning.Prepare reports documenting test results and findings.Collaborate with project teams to ensure timely completion of testing and commissioning activities.Provide technical support and guidance to junior engineers and technicians.Stay updated with industry standards and best practices for testing and commissioning.Maintain accurate records of testing and commissioning activities.

We are seeking a motivated Civil Inspector to join our team on a major metro/rail project in Riyadh. The ideal candidate will have experience in civil construction and a strong attention to detail.Responsibilities:Assist senior inspectors in conducting civil structure inspections.Perform concrete testing and sampling.Prepare inspection reports and documentation.Verify compliance with project specifications and quality standards.

TÜV Rheinland is seeking a seasoned quality control expert with a proven track record in the construction industry to join our team on a prestigious metro/rail project in Riyadh (one year project). Oversee and manage quality control activities on the project.Develop and implement quality control plans and procedures.Conduct regular inspections and audits to ensure compliance with project standards.Identify and resolve quality issues in a timely manner.Manage and mentor a team of quality control inspectors.

Are you a seasoned steel structure inspection expert with a passion for quality? We are seeking a highly qualified Senior Steel Structure Inspector to join our team on a prestigious metro/rail project in Riyadh.Inspect steel structures for compliance with project specifications and industry standards.Perform welding inspection and NDT testing.Prepare detailed inspection reports and documentation.Coordinate with other disciplines to ensure structural integrity.

Responsibilities:Conduct detailed inspections of civil structures, including viaducts, tunnels, and stations.Verify compliance with project drawings, specifications, and quality standards.Prepare inspection reports and documentation.Coordinate with other disciplines to ensure overall project quality.We are looking for a highly experienced Senior Civil Inspector to join our team on a major metro/rail project in Riyadh. The ideal candidate will have a strong background in infrastructure projects and a keen eye for detail.

Role: MEP Inspector- Electrical Location: Jeddah, Saudi ArabiaProject: Jeddah Central Development company (JCDC)Project type: InfrastructurePosition SummaryAs an Inspector your role is to perform the inspection services to verify the quality of the work performed by the Contractors (and subcontractors) and material supplied by Vendors (and sub-vendors) is in compliance with the Contracts’ stipulated requirements throughout the course of the Project.

Role: MEP Inspector- Mechanical Location: Jeddah, Saudi ArabiaProject: Jeddah Central Development company (JCDC)Project type: InfrastructurePosition SummaryAs an Inspector your role is to perform the inspection services to verify the quality of the work performed by the Contractors (and subcontractors) and material supplied by Vendors (and sub-vendors) is in compliance with the Contracts’ stipulated requirements throughout the course of the Project.

Role- Mechanical Inspector- MEP Project– Jeddah Central Development company (JCDC)Project type- InfrastructurePosition SummaryAs an Inspector your role is to perform the inspection services to verify the quality of the work performed by the Contractors (and subcontractors) and material supplied by Vendors (and sub-vendors) is in compliance with the Contracts’ stipulated requirements throughout the course of the Project.Qualification & Certifications:-Technical Diploma or Engineering Degree-At least an experience of ten (10) years with Mechanical inspection experience of six (6) years.

Have strong piling experienceHave Batch plant Experience.Have Civil materials inspection & laboratory experience.Be fully conversant with applicable industry Standards and Specifications.Conversant & good Knowledgeable QMS ISO 9001:2015.Write inspection reports and initiate Non-Conformance Reports (NCRs), and Equipment Deficiency Investigation as needed.

The Fire Protection Engineer - Testing and Commissioning (T&C) plays a vital role in ensuring the functionality and compliance of fire protection systems in buildings. he will be responsible for overseeing the testing and commissioning process, verifying that systems are installed and operate according to design specifications and relevant codes. This critical role contributes to life safety in buildings by guaranteeing fire protection systems function as intended during an emergency.ResponsibilitiesConduct site visits to review fire protection system installations, including fire alarms, sprinklers, and suppression systems.Develop and execute test plans in accordance with project specifications, national fire codes (NFPA), and local building codes.Operate testing equipment to simulate fire scenarios and verify system response (e.g., alarm activation, sprinkler operation).Troubleshoot and diagnose malfunctions in fire protection systems, ensuring timely resolution.Prepare comprehensive test reports documenting procedures, observations, and results.Maintain accurate and up-to-date project documentation, including test logs, certificates, and handover manuals.Collaborate with fire protection system designers, contractors, and building owners to ensure smooth project execution.Stay abreast of industry best practices, codes, and regulations related to fire protection systems.QualificationsBachelor's degree in Fire Protection Engineering, Mechanical Engineering, or a related field (preferred).CFPS certificate is mandatoryMinimum 5 years of experience in fire protection system testing and commissioning.Strong understanding of fire alarm systems, sprinkler systems, and other fire protection technologies.Working knowledge of relevant fire codes (NFPA) and local building codes.Proficiency in testing equipment and tools used in fire protection system commissioning.Excellent communication, interpersonal, and problem-solving skills.Ability to work independently and as part of a team in a fast-paced environment.Meticulous attention to detail and strong commitment to safety practices.