Develop and maintain detailed project schedules using Primavera P6.Analyze project progress, identify potential schedule delays and cost overruns, and recommend corrective actions.Assist in developing and monitoring project budgets, cost forecasts, and cash flow projections with the project controls teamImplement earned value management (EVM) principles and practices.Prepare regular progress reports, including schedule updates, and variance analysis.Collaborate with project managers, engineers, subcontractors, and other stakeholders to meet project objectives.Review and analyze subcontractor schedules and cost proposals.Ensure compliance with US Government regulations and OBO requirements.Contribute to risk management activities by identifying and assessing potential project risks.· Participate in project meetings and provide schedule and cost updates

Managing end-to-end sourcing of integrated electrical/instrumentation systems including transformer, switch gear, CMS system, bus duct, motors, etc.Handling expedited sourcing and logistics coordination during emergency procurement situations or project fast-tracking.For assigned packages, sources, and proposes the Bidders from registered Company approved vendor list and based on approved Procurement strategy within the Project.Ensures that all Supplier Pre-Assessment is done in compliance with the procedure to improve the performance of company/project in Supplier selection.Coordinates with all relevant in-house departments to ensure all requirements are included in the bidding documents – including flow down - and prepare/issue the RFQ to the suppliers of the Bidders lists.Challenges requirements according suppliers’ market and Project requirement.Maintains the Project Procurement Plan up to date.Has a close interface with the technical responsible and lead all technical / commercial / contractual clarifications with the suppliers.Performs commercial and contractual analysis, schedule evaluation of bids and incorporate technical evaluation from Engineering/Project Control or E/M, QA, QC & HSE.Highlights to the Procurement Management any discrepancies in Procurement processes, identify related risks and proposes actions to minimize such risk.Finalizes the Comparison Statement (CS) in APICS and makes recommendations only for technically acceptable solutions with proper and documented technical-commercial and evaluation report and seeks authority approval.Prepares and obtains signature of the Purchase Order or Contract according authorization matrix.Participate to Kick off Meetings with Suppliers, ensuring that all PO terms and obligations are clearly explained and understood.Reviews all commercial and contractual correspondence and take necessary actions as required.Coordinate with the Expediting, Quality Control and Logistic team throughout the post award to ensure a timely delivery.Check Suppliers invoices and the final account, obtain the corresponding close out certificate from Suppliers.Ensure supplier performance evaluations is performed as per Company guidelines.Note:“Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out”.

Visual inspection as per codes & standard before NDT.Interpretation of Radiographic films.Perform and witness UT, MPI and LPI tests.Monitoring NDT activities affecting the quality of welds contained each piping spools of an isometric have been completed and accepted.Preparing Weekly and Cumulative Weld Status Report.Preparing Monthly Weld Status Report and report to QC Manager.Prepare NDT request including PWHT if applicable, for visually accepted joints to cope up with the NDT percentage requirements as per line class including welder's performance percentage.Familiarize with the approved quality and inspection plan.Familiarize with approved drawing, standards, and specifications.Preparation of final documents including NDT (RT, MT & PT) reports.Controlling welding repairs by taking corrective actions.Coordination with client and NDT sub-contractors.Follow up NDT backlog with sub-contractors.

Apply for and receive work permits, conduct toolbox talks, and ensure compliance and safe work procedures.Implement HSE requirements and safety measures to protect personnel, public, property, and the environment.Verify safety induction and training for all personnel involved.Conduct safety toolbox meetings and monitor safety performance.Identify and advise on safety hazards and recommend control measures.Ensure availability of required safety measures and PPE on-site.Monitor the WMS permit system and ensure safe work procedures are followed.Manage environmental and waste control measures.Inspect site activities like fabrication, welding, and installation for compliance with specifications.Perform calibration, loop checks, and testing on various instruments.Oversee pre-commissioning, commissioning, and tube leakage testing.Manage installation and commissioning of wellhead control panels and oversee cable and tube laying.

Manage the full-cycle recruitment process effectively and efficiently as per the Recruitment function’s standards, policies and procedures; maintain the highest level of client and candidate satisfaction; aim to raise the quality-of-hire and reduce the time-to-fill; and provide guidance on recruitment market trends.Liaise with relevant functions to hand over for onboarding and monitor progress until the entry date.Collaborate closely with the hiring managers / teams to identify the right recruitment need by determining the job requirements and candidate specifications, define key priorities, timeline, any potential gaps in the job market, share frequent progress updates and solicit feedback on candidates to refine the search process.Run job interviews using prescribed tools / frameworks, assesses the candidates' knowledge, experience and soft skills in relation to recruitment and the company culture and prepare respective assessment reports.Identify, engage and build a network with active and passive candidates from entry-level to senior-level to cover immediate hiring needs, as well as a supply of candidates on-demand for future needs.Maintain and update on a daily basis the online recruitment system / database (i.e. CV, candidate reviews, tagging etc.) and ensure a high degree of data integrity, completeness and accuracy.Prepare appropriate Recruitment Reports on a weekly and ad hoc basis to keep track of recruitment progress and metrics.Position Archirodon as an employer of choice in the global marketplace; educate candidates on the culture, growth potential, compensation and benefits of working with us; and participate in recruitment events and job fairs to network in–person.Support a successful, positive, timely and consistent “hiring experience” across company, both to Hiring Managers and external candidates, and maintain the highest level of satisfaction.

Assists in the preparation of quality documentation, including the Inspection & Test Plans (ITPs) and in the review of construction documents for compliance with project quality requirements related to Mechanical works.Monitors all phases and processes required for the effective completion of all related Mechanical works and in particular issues of design, procurement, construction and final hand over of the related Mechanical works.Monitors the implementation of Method Statements, and, Inspection & Test Plans related to Mechanical works, and ensure all necessary records are generated in a timely manner in their area of assigned responsibility.Manages the inspection and testing of Mechanical works in their area of assigned responsibilities, including monitoring the work of QC Inspectors under their authority.Monitors the close out of punch lists established for incomplete related to Mechanical works.Monitors all measurement & testing instruments employed for Mechanical works, that they are functional and calibrated.Witnesses, reviews and approves welder qualifications and WPS, PQR qualifications.Liaises and coordinates with 3rd Party Testing /Inspection Company as required related to Mechanical works.Statistical analysis and evaluation of test data related to Mechanical works.Prepares, files, maintains test/inspection records and any other quality records generated related to Mechanical works.Assisting construction personnel to identify and resolve problems and potential or actual non-conformances related to Mechanical works.Advises the QC Manager of non-conformance occurrences and where necessary, raises a Non-conformance Report for non-compliant work, and monitors the closeout and effectiveness of the correction and corrective action undertaken.Where required, assists the QC Manager in undertaking periodic audits, including those of sub-contractors and suppliers, in particular technical compliance audits in their field of specialization.Witnessing of all NDT and Mechanical testing (including hydro testing, pneumatic testing etc.) specified.Attends and witnesses all Client verification of work (inspection, test and the like) on site, and coordinates close out of any and all outstanding issues related to Civil works.Where required, assists in the preparation of final document for certification.Assists in the systems commissioning as required.Hands on in managing site interface with implementation contractor QC personnel , client QC personnel , management of QC inspectors Knowledgeable in codes and standards , ADNOC specifications , SHELL DEP . Familiar with site fabrication , construction and erection activities.

Senior Pipeline QS with expertise in pipeline activities, collaborating closely with Field Engineering, Procurement, Cost Control, Construction, and Contracts teams to manage quantity and cost control workflows. Skilled in identifying project risks based on contract documents, schedules, and deliverables, ensuring minimal cost and schedule impacts. Proficient in submitting fortnightly risk reports and mitigation plans aligned with EPC/Contractor performance. Experienced in developing strategic plans and advising management on cost-controlled solutions for claims raised by contractors, while cross-checking MTOs with AFC drawings to update procurement needs. Strong knowledge of project design methods, construction monitoring, and lifecycle planning from quantity and material scheduling to coordinating with multidisciplinary teams (piping, mechanical, civil, E&I). Hands-on experience with tie-ins, pre-shutdown, and shutdown activities, including material requisition packages. Adept in field change approvals (FCN, DCN), site variations, test pack verifications, and as-built requirements. Well-versed in Installation Work Packages (IWP) and Workface Planning (WFP) to implement Advanced Work Package (AWP) methodology, ensuring milestone-based execution. Proficiency in MS excel for controlling the Materials Ability to reconcile the materials released to sub-contractor. Proficiency on AutoCAD for reading Alignment sheets drawings and basilar knowledge of related pipeline design

We are constantly growing and are currently looking for Construction Manager (Oil & Gas) to join our top qualified and knowledgeable Project Construction Team in one of Project in Abu Dhabi, United Arab Emirates.Would you like to be part of a dynamic EPC leader with global presence? We’d like to meet you.Join our worldwide journey. Build on something that matters!What you will need to do:Lead an established team of Section Heads and Engineers to secure the completion of the project within time and budget.Manage direct multi-faceted construction activities, including subcontractors, and personnelEnsure all construction activities are performed safely and in compliance with applicable policies, standards, guidelines and proceduresEstablish and maintain effective working relationships with clients and take responsibility for ensuring customer satisfaction for construction and completions activitiesProvide Construction support to Project Management during the initial planning phase of the projectParticipate in Constructability and 3D model review sessionsBuild and Manage effective Construction teamsEnsure all construction activities are performed in accordance with project specifications and drawings, within budget and time schedulesMaintain effective communication and report the status of construction progress to the project teamManage the RFI and change order process in the fieldAssist with the preparation of change ordersMaintain excellent project records and documentation of delays and other potential project impactsMaintain detailed, accurate, and complete documentation of construction activitiesWhat you will need to have:Bachelor's degree in Mechanical Engineering / Master's Degree (Optional but Beneficial)Certified Construction Manager (CCM) / Project Management Professional (PMP)Relevance of experience in Rotating & Static Equipment Installation and Strong understanding of Oil & Gas operations (Brown Field)Minimum of 20-25 Years of experience with at least 10 years in a managerial role with a focus in the Oil & Gas Projects in the Middle EastHaving previous experience with ADNOC projects (ADNOC approval is advantage)Proven track record of managing large-scale projectsYou are someone who:Is outgoing and skilled communicatorIs able to work both independently and as team leader, exercising professional judgment and coordination skillsHas excellent organizational skillsIs passionate about his/her field of expertise and determined to succeed

Review of project technical specifications, drawings, and BOQ to identify and determine quality and engineering criteria for materials, workmanship and testing requirements related to civil works.Performs verification inspection of work elements related to civil works, to assure compliance with established procedures and Project’s specified requirements.Participates in on site receiving Inspection of civil materialsPrepare, review of concrete specification, mix design and ITPs.Civil Testing Standards, Concreting, Marine, Onshore & Offshore Construction Inspections.Knowledge in all civil laboratory testing requirements.

· Prepare Contract Baseline Schedule and / or Revised Schedules in coordination with the Planning Manager and the project team· Assist the Planning Manager at project start in the preparation of all reports and / or registers to assure the implementation of the following procedures:- Control of Planning & Scheduling- Progress Measurement- Reporting· Review the project(s) schedule(s) updates done by the planner(s) and liaise & coordinate with the different project teams in order to maintain proper progress recording and/or monitoring of the project(s) schedule(s).· In coordination with the Planning Manager, highlights to the Project’s Management any deviation and / or delays from the approved plan.· Participate in coordination with the Planning Manager & the Project Controls Manager in the preparation of claims & extension of time.· Liaise and assist the Project Controls Manager in preparing weekly, monthly reports, budget preparation and maintains proper project planning records· Participate in periodic Project team meetings to elaborate the project’s schedule and the progress status· Record any suggested changes and / or deviations from the plan and advice of its effect on the overall schedule

Develop and maintain detailed project schedules using Primavera P6.Analyze project progress, identify potential schedule delays and cost overruns, and recommend corrective actions.Assist in developing and monitoring project budgets, cost forecasts, and cash flow projections with the project controls teamImplement earned value management (EVM) principles and practices.Prepare regular progress reports, including schedule updates, and variance analysis.Collaborate with project managers, engineers, subcontractors, and other stakeholders to meet project objectives.Review and analyze subcontractor schedules and cost proposals.Ensure compliance with US Government regulations and OBO requirements.Contribute to risk management activities by identifying and assessing potential project risks.· Participate in project meetings and provide schedule and cost updates

Manages the team of storekeepers and monitors all the activities in the most proper manner by following all the procedures described in stores operations manual.Ensures that Q.A. / Q.C. personnel (whenever necessary) approve, and section head accepts and signs the delivery notes and / or invoices prior to stamping and receiving items purchased from market.Avoids delays in clearance of cash invoices and issuance of stock items to the maximum extent.Supervises follow-up of HSE rules and regulations and takes all the necessary precautions while loading and unloading items in stores.Distribution of jobs equally to all the storekeepers under him.Ensures that Back-up of System is scheduled on a daily basis.Ensures that stock items are located on shelves or in yard, in an organized and systematic layout, and maintained as per company’s and manufacturer’s recommendations and updated with all the location numbers accordingly.Processes all the documents enabling timely monthly closing of store books and distribution of reports to the management and all the sections of the site.Supervises smooth operation of Physical Inventory during November every year and submits Variance Lists with justified explanation to the management.Performs any other related duties as assigned.

Provide continuous support to all users on Archirodon’s Quality Systems and encouraging the continuous improvement of our policies, procedures, and forms.Raise awareness of Process Governance.Support QLT Project Teams on Workflow Automation toolUpdate existing training material and develop additional one regarding QLT workflows, documentation, awareness campaigns.Organize series of meetings with Departments & Divisions, supporting them on the development of their Business Continuity PlanCollect and register common findings from audits, maintain the data base and facilitate the process improvement initiatives.

1. Lead and supervise lifting operations for construction, maintenance, and pipeline installation activities, ensuring all lifting tasks are properly planned, executed, and documented. 2. Assess lifting risks and determine control measures to ensure the safe execution of operations. 3. Conduct thorough risk assessments for lifting activities, ensuring that potential hazards are identified and mitigated. 4. Monitor the lifting operations on-site to ensure compliance with approved safety procedures and protocols. 5. Supervise and direct the work of riggers, crane operators, and other personnel involved in lifting operations. 6. Collaborate with other departments, such as operations, engineering, and maintenance teams, to ensure that lifting activities are integrated into overall project timelines and objectives. 7. Communicate lifting plans and schedules to all relevant stakeholders, including project managers and safety officers. 8. Oversee the inspection and maintenance of all lifting equipment to ensure it is in good working order before, during, and after operations. 9. Work with maintenance teams to schedule and document routine inspections and certifications of lifting equipment, ensuring compliance with company and regulatory standards.

Assists in the preparation of quality documentation, including the Inspection & Test Plans (ITPs) and in the review of construction documents for compliance with project quality requirements related to E&I works.Monitors all phases and processes required for the effective completion of all related E&I works and in particular issues of design, procurement, construction and final hand over of the related E&I works.Monitors the implementation of Method Statements, and, Inspection & Test Plans related to E&I works, and ensure all necessary records are generated in a timely manner in their area of assigned responsibility.Manages the inspection and testing of E&I works in their area of assigned responsibilities, including monitoring the work of QC Inspectors under their authority.Monitors the close out of punch lists established for incomplete related to E&I works.Monitors all measurement & testing instruments employed for E&I / Telecom works, that they are functional and calibrated.Liaises and coordinates with 3rd Party Testing /Inspection Company as required related to E&I works.Statistical analysis and evaluation of test data related to E&I works.Prepares, files, maintains test/inspection records and any other quality records generated related to E&I works.Assisting construction personnel to identify and resolve problems and potential or actual non-conformances related to E&I works.Advises the QC Manager of non-conformance occurrences and where necessary, raises a Non-conformance Report for non-compliant work, and monitors the closeout and effectiveness of the correction and corrective action undertaken.Where required, assists the QC Manager in undertaking periodic audits, including those of sub-contractors and suppliers, in particular technical compliance audits in their field of specialization.Where required, assists in the preparation of final document for certification.Assists in the systems commissioning as required.

Review Material Take-off List provided by the Designer.Coordinates with Procurement Department to identify the Long Lead Items & Short Lead Items.Identifies the approved vendor’s list (RVL) issued by the Employer, if exists.Reviews material / purchase requisitions (PR) as per Employer requirements and especially the requested specifications.Reviews purchase orders (PO) and especially the requested specifications.Monitors and reviews the proposed technical documents from Vendor / Manufacturer / Supplier / Stockiest and confirms the proposed documents are as per the applicable Employer’s Standards and Inspection and Testing requirements.Coordinates with involved TPI Agencies, Manufacturers and Employer’s Inspection agencies.Ensures the receiving of approval by Employer / PMC for TPI Agencies to be involved and follow up the required inspection notifications.Allocates Inspection Levels for each material in accordance with Employer’s Standards and if not exist, according to Project requirements.Coordinates with the Vendor / Manufacturer to get the Inspection & Test Plan for review and approval prior the manufacturing / fabrication process.Monitors the manufacturing / fabrication progress.Prepares Inspection Assignment Package “IAP”.Issuing the Inspection Notification after coordinating with the Manufacturer.Reviews the inspection & test plans (ITPs) provided by the Manufacturers and Vendors.Schedules and conduct Pre-Inspection Meeting “PIM” and every inspection activity.Reviews Inspection Report and related Documents.Submits the received inspection reports to Employer / PMC for review or approval.Follows up until the Inspection Release, prepares the Final Disposition Report if required and close the Inspection Lot (IL).Prepares Quality procurement weekly/monthly reports.Brings matters concerning non-conforming materials and services to the attention of the QC Manager.Performs any other related duties as assigned.

Assists in the preparation of quality documentation, including the Inspection & Test Plans (ITPs) and in the review of construction documents for compliance with project quality requirements related to Welding works.Monitors all phases and processes required for the effective completion of all related Welding works and in particular issues of design, procurement, construction and final hand over of the related Welding works.Monitors the implementation of Method Statements, and, Inspection & Test Plans related to Welding works, and ensure all necessary records are generated in a timely manner in their area of assigned responsibility.Manages the inspection and testing of Welding works in their area of assigned responsibilities, including monitoring the work of QC Inspectors under their authority.Monitors the close out of punch lists established for incomplete related to Mechanical works.Monitors all measurement & testing instruments employed for Welding works, that they are functional and calibrated.Witnesses, reviews and approves welder qualifications and WPS, PQR qualifications.Liaises and coordinates with 3rd Party Testing /Inspection Company as required related to Mechanical works.Statistical analysis and evaluation of test data related to Welding works.Prepares, files, maintains test/inspection records and any other quality records generated related to Welding works.Assisting construction personnel to identify and resolve problems and potential or actual non-conformances related to Welding works.Advises the QC Manager of non-conformance occurrences and where necessary, raises a Non-conformance Report for non-compliant work, and monitors the closeout and effectiveness of the correction and corrective action undertaken.Where required, assists the QC Manager in undertaking periodic audits, including those of sub-contractors and suppliers, in particular technical compliance audits in their field of specialization.Attends and witnesses all Client verification of work (inspection, test and the like) on site, and coordinates close out of any and all outstanding issues related to Civil works.Where required, assists in the preparation of final document for certification.

Apply for and receive work permits, conduct toolbox talks, and ensure compliance and safe work procedures.Implement HSE requirements and safety measures to protect personnel, public, property, and the environment.Verify safety induction and training for all personnel involved.Conduct safety toolbox meetings and monitor safety performance.Identify and advise on safety hazards and recommend control measures.Ensure availability of required safety measures and PPE on-site.Monitor the WMS permit system and ensure safe work procedures are followed.Manage environmental and waste control measures.Inspect site activities like fabrication, welding, and installation for compliance with specifications.Perform calibration, loop checks, and testing on various instruments.Oversee pre-commissioning, commissioning, and tube leakage testing.Manage installation and commissioning of wellhead control panels and oversee cable and tube laying.

Supervise and coordinate the execution of electrical and instrumentation systems ensuring compliance with specifications, schedules, and safety regulations.Oversee the construction team, ensuring tasks are completed on time and meet quality standards.Ensure availability of materials, tools, and equipment, and address any shortages with the procurement team.Coordinate with contractors, subcontractors, and project teams for smooth site execution.Liaise with senior engineers and Section Head to resolve issues and ensure efficient project execution.Ensure full compliance with HSE rules and conduct site inspections to maintain safety protocols.Ensure proper use of Personal Protective Equipment (PPE) and adherence to safety standards.Follow up on testing and inspection schedules, ensuring compliance with safety and regulatory standards.Monitor work progress, address delays, and provide regular progress reports to the Section Head.Perform quality checks on electrical and instrumentation systems to ensure they meet industry standards.Maintain accurate records of work performed, materials used, and inspection results Assist in work plans, project schedules, and any other duties assigned by the Section Head or Senior Project Manager.

· Review and manage the Interface Management Plan.· Act as the central point of contact between Contractors, Vendors, and the Client to ensure interface issues are identified, communicated, and resolved effectively.· Monitor and resolve interface issues during all project phases, ensuring timely resolution and maintaining project schedules.· Maintain and update the Interface Tracking Register and ensure accurate status reporting in the Project Monthly Report.· Develop, maintain, and monitor the Interface Matrix and Plan to ensure all interfaces are clearly defined and tracked.· Provide technical assistance and act as a focal point for resolving issues of competing priorities or technical compatibility.· Liaise with the engineering team to ensure interfaces are clearly defined and integrity is maintained.· Participate in and support meetings related to interface issues to provide technical input and facilitate resolution.· Support the definition and maintenance of the project risk register to identify and mitigate interface-related risks.· Oversee all integration and interface activities up to and including project handover.· Ensure scope integrity and alignment between all interfacing parties

Review of project technical specifications, drawings, and BOQ to identify and determine quality and engineering criteria for materials, workmanship and testing requirements related to welding/RTFI works.Performs verification inspection of work elements related to welding/RTFI works, to assure compliance with established procedures and Project’s specified requirements.Participates in on site receiving Inspection of welding/RTFI materials.Prepare, review of welding specification, mix design and ITPs.Welding Testing Standards,

Assists in the preparation of quality documentation, including the Inspection & Test Plans (ITPs) and in the review of construction documents for compliance with project quality requirements related to Mechanical works.Monitors all phases and processes required for the effective completion of all related Mechanical works and in particular issues of design, procurement, construction and final hand over of the related Mechanical works.Monitors the implementation of Method Statements, and, Inspection & Test Plans related to Mechanical works, and ensure all necessary records are generated in a timely manner in their area of assigned responsibility.Manages the inspection and testing of Mechanical works in their area of assigned responsibilities, including monitoring the work of QC Inspectors under their authority.Monitors the close out of punch lists established for incomplete related to Mechanical works.Monitors all measurement & testing instruments employed for Mechanical works, that they are functional and calibrated.Witnesses, reviews and approves welder qualifications and WPS, PQR qualifications.Liaises and coordinates with 3rd Party Testing /Inspection Company as required related to Mechanical works.Statistical analysis and evaluation of test data related to Mechanical works.Prepares, files, maintains test/inspection records and any other quality records generated related to Mechanical works.Assisting construction personnel to identify and resolve problems and potential or actual non-conformances related to Mechanical works.Advises the QC Manager of non-conformance occurrences and where necessary, raises a Non-conformance Report for non-compliant work, and monitors the closeout and effectiveness of the correction and corrective action undertaken.Where required, assists the QC Manager in undertaking periodic audits, including those of sub-contractors and suppliers, in particular technical compliance audits in their field of specialization.Witnessing of all NDT and Mechanical testing (including hydro testing, pneumatic testing etc.) specified.Attends and witnesses all Client verification of work (inspection, test and the like) on site, and coordinates close out of any and all outstanding issues related to Civil works.Where required, assists in the preparation of final document for certification.Assists in the systems commissioning as required.Hands on in managing site interface with implementation contractor QC personnel , client QC personnel , management of QC inspectors Knowledgeable in codes and standards , ADNOC specifications , SHELL DEP . Familiar with site fabrication , construction and erection activities.

Manages the team of storekeepers and monitors all the activities in the most proper manner by following all the procedures described in stores operations manual.Ensures that Q.A. / Q.C. personnel (whenever necessary) approve, and section head accepts and signs the delivery notes and / or invoices prior to stamping and receiving items purchased from market.Avoids delays in clearance of cash invoices and issuance of stock items to the maximum extent.Supervises follow-up of HSE rules and regulations and takes all the necessary precautions while loading and unloading items in stores.Distribution of jobs equally to all the storekeepers under him.Ensures that Back-up of System is scheduled on a daily basis.Ensures that stock items are located on shelves or in yard, in an organized and systematic layout, and maintained as per company’s and manufacturer’s recommendations and updated with all the location numbers accordingly.Processes all the documents enabling timely monthly closing of store books and distribution of reports to the management and all the sections of the site.Supervises smooth operation of Physical Inventory during November every year and submits Variance Lists with justified explanation to the management.Performs any other related duties as assigned.

Assists in the preparation of quality documentation, including the Inspection & Test Plans (ITPs) and in the review of construction documents for compliance with project quality requirements related to Painting & coating works.Monitors all phases and processes required for the effective completion of all related Painting & coating works and in particular issues of design, procurement, construction and final hand over of the related Painting & coating works.Monitors the implementation of Method Statements, and, Inspection & Test Plans related to Painting & coating works, and ensure all necessary records are generated in a timely manner in their area of assigned responsibility.Manages the inspection and testing of Painting & coating works in their area of assigned responsibilities, including monitoring the work of QC Inspectors under their authority.Monitors the close out of punch lists established for incomplete related to Painting & coating works.Monitors all measurement & testing instruments employed for Mechanical works, that they are functional and calibrated.Liaises and coordinates with 3rd Party Testing /Inspection Company as required related to Painting & coating works.Statistical analysis and evaluation of test data related to Painting & coating works.Prepares, files, maintains test/inspection records and any other quality records generated related to Painting & coating works.Assisting construction personnel to identify and resolve problems and potential or actual non-conformances related to Painting & coating works.Advises the QC Manager of non-conformance occurrences and where necessary, raises a Non-conformance Report for non-compliant work, and monitors the closeout and effectiveness of the correction and corrective action undertaken.Where required, assists the QC Manager in undertaking periodic audits, including those of sub-contractors and suppliers, in particular technical compliance audits in their field of specialization.Where required, assists in the preparation of final document for certification.Assists in the systems commissioning as required.

Assists in the preparation of quality documentation, including the Inspection & Test Plans (ITPs) and in the review of construction documents for compliance with project quality requirements related to E&I works.Monitors all phases and processes required for the effective completion of all related E&I works and in particular issues of design, procurement, construction and final hand over of the related E&I works.Monitors the implementation of Method Statements, and, Inspection & Test Plans related to E&I works, and ensure all necessary records are generated in a timely manner in their area of assigned responsibility.Manages the inspection and testing of E&I works in their area of assigned responsibilities, including monitoring the work of QC Inspectors under their authority.Monitors the close out of punch lists established for incomplete related to E&I works.Monitors all measurement & testing instruments employed for E&I / Telecom works, that they are functional and calibrated.Liaises and coordinates with 3rd Party Testing /Inspection Company as required related to E&I works.Statistical analysis and evaluation of test data related to E&I works.Prepares, files, maintains test/inspection records and any other quality records generated related to E&I works.Assisting construction personnel to identify and resolve problems and potential or actual non-conformances related to E&I works.Advises the QC Manager of non-conformance occurrences and where necessary, raises a Non-conformance Report for non-compliant work, and monitors the closeout and effectiveness of the correction and corrective action undertaken.Where required, assists the QC Manager in undertaking periodic audits, including those of sub-contractors and suppliers, in particular technical compliance audits in their field of specialization.Where required, assists in the preparation of final document for certification.Assists in the systems commissioning as required.