Civil DisciplineJob Ticket: Sr. Civil Designer – SP3D / E3D A. QUALIFICATIONS: Holds a certificate/diploma in Civil Engineering and have a minimum 12 years of experience in oil/gas onshore and offshore facilities.Should have at least 7 years of working experience in 3D environment using PDMS or SP3D software. Must have working knowledge of E3D and SP3D software. Other software like AutoCAD, Microstation etc. is required. Experience in field engineering activities will be an added advantage. B. RESPONSIBILITIES / PROFILE: Reports operationally to the Area Lead and functionally to Design Unit Head with following responsibilities / profile:   (i) Develop Site Plans and Infrastructure Layouts:- Develop comprehensive site plans and infrastructure layouts for oil and gas facilities, ensuring optimal land use and functionality.(ii) Perform Civil Routing Studies:- Conduct routing studies for essential infrastructure components such as roads, drainage systems, and utility corridors.(iii) Establish Structural Configuration:- Establish configurations for structural elements such as foundations, retaining walls, and support structures.(iv) Pro-active, Co-operating, and Dutiful:- Exhibit a proactive approach, cooperate effectively with team members, and fulfill duties with diligence and responsibility.(v) Perform 3D Infrastructure Modelling:- Perform 3D modelling of infrastructure components using software like Civil 3D or Revit to visualize and optimize designs.(vi) Perform Civil Modelling Using 3D Tools:- Utilize 3D tools to model civil structures and supports based on engineering studies and project requirements.(vii) Incorporate Modifications and Changes:- Route minor infrastructure lines and incorporate necessary modifications and changes into the design.(viii) Perform Various Checks:- Conduct various checks such as clash detection and compliance verification to ensure design integrity and safety.(ix) Produce Civil-Related Drawings:- Produce detailed civil-related drawings, including site plans, sections, and construction details.(x) Extract Drawings from the 3D Model:- Extract construction and general arrangement drawings from the 3D model for use in project execution.(xi) Perform Material Take-Off (MTO):- Perform material take-off for civil components to ensure accurate estimation and procurement.(xii) Coordinate with Other Designers/Engineers:- Coordinate with other designers and engineers to ensure interdisciplinary alignment and project coherence.(xiii) Report Progress of Work:- Regularly report the progress of work to project managers and stakeholders, highlighting key achievements and challenges.(xiv) Review and Comment on Vendor Drawings:- Review and provide comments on vendor drawings to ensure compliance with project specifications and standards.  1/1 August - 2022

Job Ticket Description - Senior Civil DesignerQualification  -  Diploma / DegreeExperience  -  Minimum 15 years (of relevant experience)Work experience in Onshore Civil structural, building and underground modelling, drawing extraction and development, with strong technical background and good practical aptitude.Work experience in Modelling in S3D, PDMS and AVEVA E3D and drawings extraction using S3D Draft, PDMS Draft & E3D draft is a must, only training in software will not be considered as a qualification.Experience in using E3D & E3D Draft, PDMS, PDMS draft, SP3D & Smart Sketch, Auto Cad and others Experience in 3D model review for clash checking, preparation of material requisitions for Structural materials and Material take off (MTOs).Modelling, Checking and detailing of structures and foundations for pipe racks, technological structures (process structures), platforms, shelters, equipment and other foundations, underground networks modelling, underground structures, buildings and surrounding area modelling etc.,Preparation and finalization of Material Take Off for Civil & Other works and schedule of quantities.Should be able to coordinate between various disciplines, with team members, project management team and other work share offices.Should be ready to work in dynamic and challenging environment and be proactive in problem solving and shall have good communication skillsExperience in basic, conceptual, FEED, EPC and EPIC projectsReview of vendor drawingsKnowledge of using TEKLA and BOCAD will have preference.Job Ticket Description - Civil DesignerQualification  - Diploma / Degree    Experience  - Minimum 10 years - 15 years (of relevant experience)Work experience in Modelling in S3D, PDMS and AVEVA E3D and drawings extraction using S3D Draft, PDMS Draft & E3D draft is a must, only training in software will not be considered as a qualification Experience in using E3D & E3D Draft, PDMS, PDMS draft, SP3D & Smart Sketch, Auto Cad and others.Experience in 3D model review for clash checking, preparation of material requisitions for Structural materials and Material take off (MTOs).Modelling, Checking and detailing of structures and foundations for pipe racks, technological structures (process structures), platforms, shelters, equipment and other foundations, underground networks modelling, underground structures, buildings and surrounding area modelling etc.,Preparation Material Take Off for Civil, Structural, Underground and buildings worksShould be proactive and ready to take up challenges and shall have strong communication skills.Experience in basic, conceptual, FEED, EPC and EPIC projectsReview of vendor drawingsKnowledge of using TEKLA and BOCAD will have preference.

 Civil DisciplineJob Ticket: Area Lead / Sr. Civil Engineer A. QUALIFICATIONS: Degree in Civil Engineering with an extensive expertise in Civil Design/Engineering with at least 12 years experience in Major oil/gas offshore and onshore projects in the capacity of Lead or Area Lead Engineer.  B. RESPONSIBILITIES / PROFILE: Reports operationally to the Civil Lead Engineer with the following responsibilities/profile, as a minimum:(i) Extensive Knowledge and Experience:- Should have extensive knowledge and experience in developing site plans, civil layouts, and infrastructure routing studies for oil and gas, offshore, and onshore projects.(ii) 3D Environment Experience:- Should have experience in handling civil engineering projects in a 3D environment using tools such as Civil 3D, Revit, or similar software.(iii) Technical Management:- Provide technical management of the civil engineering personnel under their responsibilities, ensuring high-quality deliverables.(iv) Team Guidance:- Provide guidance to all team members with proper work distribution and mentorship to enhance team performance and development.(v) Coordination with Specialist Engineers:- Coordinate activities with specialist engineers, such as geotechnical and structural leads, to ensure integrated project solutions.(vi) Project Specifications Implementation:- Ensure implementation of project specifications, procedures, design requirements, and industry standards in all civil engineering activities.(vii) Interdisciplinary Coordination:- Facilitate coordination with other disciplines, such as mechanical, electrical, and piping, to ensure cohesive project execution.(viii) Client and Vendor Interaction:- Participate in meetings and assist in technical matters with clients, vendors, and contractors, providing expert civil engineering insights.(ix) Project Reviews Participation:- Participate in key project reviews, site layout reviews, HAZOP, lessons learned workshops, constructability reviews, and design/model review meetings.(x) Effective Communication:- Should be a good communicator with effective written and oral communication abilities to convey technical information clearly and concisely.(xi) Organize 3D Model Reviews:- Organize periodic internal 3D model reviews and assign job responsibilities to designers during this period to ensure project accuracy and efficiency.   1/2 August - 2022

Inclusion StandardsIn our continuous journey to developing and building culture of inclusion, we adhere to four Inclusion Gold Standards. And you?- We challenge our biases and embrace diversity of thought- No one has all the knowledge and solutions, collectively we do.- We foster a caring environment where people are respected, comfortable to share and be heard ;- We promote active listening for effective decision and action.Starting Date: ASAP

The Designer in the Instrumentation and Control Discipline is primarily concerned with the preparation of Instrumentation engineering drawings, design documents and calculations for projects, tenders and proposals, and to do so as per client requirements, company standards and project scope of work.• Design and drafting of Instrumentation drawings, Material Take-Off and Schedules for a given project. Development of drawings, models and documents listed above using CAD systems. As required for the project or proposal. Output includes:• Input / Output list• Equipment list layout• Control Room Arrangement• Field Instrumentation Location Layouts• Preliminary Cable Tray Routing• Typical Installation Details• Material Take-Offs• 3DModeling of instrumentation and tapping points (offline), Junction Boxes, local panels, etc., for the project.• Loop Diagrams• Termination Diagrams• Detailed Cable/Tray Routing• Cable Schedules• Installation Details• As-Built Documentation• Design and drafting hook up drawings• Undertaking site visits for data collection purposes and reporting on site queries to Lead Engineer• Provide inputs for proposal preparation purposes. Deliverables include; Preliminary Input/output Lists drawing man-hour estimations, and Preliminary Equipment List layouts.• Software Skills and Experience in SPI, AVEVA, SP3D, E3D is essential. Candidate should have atleast minimum 2 software experience amongst the 4 software mentioned. Knowledge with PDMS, AutoCAD, Microstation.• Produce drawings/installation design with Specialist Engineers and senior designers' inputs according to project schedule and contractual requirements.• Uphold standards of quality, applicable codes and project & industry standards and practices.• Apply standards of CAD software used.• Ensures the accuracy of the material take off.

LOOKING FOR E3D, SP3D DESIGN ENGINEEROFFSHORE/ ONSHORE OIL AND GAS EXPERIENCE

Duties and responsibilities include:• Creating electrical diagrams and technical drawings for electrical systems• Using specialized design and drawing software to create electrical system designs• Collaborating with project managers and other engineers to design, implement, and improve electrical systems• Conducting research and development activities to come up with new design ideas and technologies• Testing and validating electrical systems to ensure they meet design specifications and safety standards• Performing detailed calculations to establish standards and specifications• Overseeing the installation and operation of electrical systems to ensure they function as designed• Identifying and resolving design and implementation issues• Preparing and presenting technical reports and documentation• Staying up-to-date with the latest technological advancements and industry trends in electrical engineering• Ensuring compliance with electrical safety regulations and standards

• Holds a certificate/diploma in Mechanical Engineering and have a minimum 8-10 years of experience in oil/gas onshore and offshore facilities.• Should have at least 7 years of working experience in 3D environment using PDMS or SP3D software.• Must have working knowledge of E3D and SP3D software.• Other software like AutoCAD, Microstation etc. is required.• Experience in field engineering activities will be an added advantag

Electrical E3D DesignerPosition: Electrical E3D DesignerExperience: 14+ years in Oil & Gas ProjectsLocation: Abu DhabiKey Responsibilities:Create detailed electrical designs using Smart Plant 3D, PDMS, PDS, and Aveva E3D.Generate and review drawings using E3D Draw/Draft, AutoCAD, and MicroStation.Coordinate with multidisciplinary teams to ensure design accuracy and compliance.Work independently to deliver high-quality designs on time.Education:Diploma in Electrical Engineering or related field.Qualifications:Expertise in 3D modeling tools and industry standards.Proven experience in O&G electrical design.

The E3D Piping Engineer will be responsible for:Design and Documentation:Writing Piping Design Basis, PMS, and technical purchase specifications.Preparing equipment layouts, piping layouts, GADs, isometrics, nozzle orientations, and pipe supports.Generating MTO/BOM and conducting stress analysis.Supplier and Technical Coordination:Participating in technical alignment and reviewing supplier offers.Issuing technical comparison tables and validating supplier technical documents.Reviewing valves lists and validating process data in collaboration with the process team.Client and Regulatory Compliance:Reviewing client design basis, applicable codes and standards, and incorporating local regulations.Ensuring compliance with HSE requirements in piping design.Project Collaboration:Managing engineering sub-contractors, defining RFQ packages, and evaluating subcontractor performance.Participating in meetings with clients, PMC, vendors, and internal teams.Leading weekly piping discipline meetings and contributing to in-house project reviews.3D Modelling ExpertiseProficient in 3D modelling processes, tools, and procedures.Reviewing 3D models for compliance with client specifications and ensuring maintenance and accessibility of equipment, piping, and instruments.