1. Drawing Review & Production Release:Review IFC drawings, shop drawings, GA drawings, fabrication drawings, and BOM before production start.Coordinate with detailing / engineering department for missing details, revisions, and discrepancies.Ensure only latest approved drawings are released to production.Break down drawings into production priorities by project, zone, sequence, and delivery requirement.Prepare production mark-wise execution plans.2. Material Planning & Control:Coordinate with Procurement and Stores for raw material availability (plates, beams, channels, pipes, bolts, consumables).Verify material traceability, heat numbers, MTC availability, and stock status.Ensure timely issuance of materials to cutting / fabrication sections.Monitor shortages and raise material requests proactively.Control wastage, nesting efficiency, and scrap reduction.3. Production Scheduling & Shop Floor Management:Prepare daily / weekly / monthly fabrication production plans.Allocate work to cutting, fit-up, welding, drilling, machining, blasting, painting, and assembly sections.Monitor target vs actual production tonnage / quantities.Ensure bottlenecks are resolved immediately.Optimize machine loading and workflow movement inside factory.4. Fabrication & Welding Control:Supervise fit-up, welding, grinding, straightening, and assembly works.Ensure fabrication as per approved drawings, tolerances, and standards.Monitor WPS / PQR / welder qualification compliance where applicable.Ensure weld quality and dimensional accuracy.Coordinate rework actions if defects identified.5. Quality Assurance / NCR Management:Coordinate with QA/QC for in-process and final inspections.Ensure hold points and inspection stages are completed.Raise, track, and close all NCRs (Non-Conformance Reports) on priority basis.Investigate root causes of NCRs and implement corrective / preventive actions.Maintain punch lists, rejection logs, and quality improvement records.6. Surface Preparation / Painting / Finishing:Coordinate blasting, primer, paint system application, DFT checks, touch-up, and final finish.Ensure painting specs comply with project requirements.Monitor curing, handling, and damage prevention before dispatch.7. Packing, Dispatch & Delivery Coordination:Prepare dispatch priorities based on site erection sequence and client requirements.Coordinate with logistics for trailers, loading plans, permits, and delivery schedules.Ensure proper tagging, packing lists, delivery notes, and mark identification.Prevent shortages / wrong loading / damaged materials.Track delivered vs pending items until final closeout.8. Coordination with Other Departments:Work closely with Planning Engineer, Project Engineer, QA/QC, Stores, Procurement, Maintenance, and Logistics teams.Attend production meetings and submit progress updates.Coordinate urgent site requirements and replacement items.9. Reporting & Documentation:Prepare daily production reports, backlog reports, efficiency reports, and delay analysis.Maintain drawing status, production trackers, NCR logs, and dispatch summaries.Update management on risks affecting deadlines.10. Cost Control / Productivity Improvement:Reduce rework, downtime, material waste, and overtime misuse.Improve productivity per man-hour and machine-hour.Suggest lean improvements and process enhancements.

We are looking for an experienced Foreman with a solid background in steel structure erection work, capable of supervising site teams and ensuring smooth and safe project execution.Supervise and manage daily steel structure erection activities including columns, rafters, beams, bracings, platforms, handrails, and cladding.Allocate and manage manpower (fitters, fabricators, welders, helpers, riggers, etc.).Coordinate with Site Engineers, Project Engineers, and crane operators for work sequence and lifting activities.Ensure all erection work is carried out as per approved drawings, method statements, and safety standards.Check alignment, leveling, bolt tightening/torquing, and ensure quality of installation.Prepare daily progress updates and report site issues promptly.Maintain site discipline and ensure workers follow HSE guidelines.Assist in inspections (WIR/MIR) and coordinate with QA/QC teams.Solve on-site issues to avoid delays and maintain productivity.

Project Planning & Scheduling:Prepare detailed project schedules using Primavera P6 and/or Microsoft Project.Develop baseline programs, recovery plans, and revised schedules.Create WBS, milestones, critical path, and activity sequencing.Prepare fabrication, delivery, erection, and handover schedules.Progress Monitoring & Control:Track actual progress versus planned progress on daily / weekly / monthly basis.Update schedules regularly and issue variance reports.Identify delays, slippages, and critical activities with mitigation plans.Maintain S-curves, dashboards, and KPI reports.Lookahead & Resource Planning:Prepare 2-week / 3-week / monthly lookahead schedules.Coordinate manpower, equipment, and material requirements with project teams.Resource load schedules for fabrication yard and site execution.Monitor productivity trends and recommend improvements.Coordination with Departments:Coordinate with Project Engineers, Site Engineers, Production team, Procurement, and QA/QC.Follow up drawing approvals, material availability, and site readiness impacting schedule.Support management meetings with planning updates and action items.Reporting & Documentation:Prepare daily, weekly, and monthly progress reports.Submit client-facing planning reports and presentation updates.Maintain schedule revisions, logs, and planning records.Prepare executive summaries for management.Claims / Delay Analysis Support:Assist commercial team with EOT claims, delay notices, and impact analysis.Prepare impacted programs, revised baselines, and time extension support documents.Maintain delay event registers.

We are seeking a highly skilled Estimation Engineer with strong experience in steel fabrication and structural steel projects within the GCC region. The ideal candidate will be responsible for preparing accurate cost estimates, BOQs, tender pricing, and technical evaluations for industrial, commercial, and infrastructure projects, ensuring competitiveness and profitability.Estimation & CostingPrepare detailed cost estimates for structural steel, steel fabrication, PEB, and erection worksAnalyze IFC / Tender drawings, specifications, and scope of workPrepare BOQs, material take-offs (MTOS), and quantity calculationsEvaluate material costs (steel sections, plates, bolts, paint systems, consumables)Calculate fabrication, blasting, painting, galvanizing, transportation, and erection costsEstimate man-hours for fabrication and site erection activitiesTendering & BiddingReview tender documents and identify commercial and technical risksPrepare competitive tender pricing aligned with GCC market ratesCoordinate with procurement, production, and site teams for accurate inputsAssist in pre-bid clarifications, RFIs, and value engineering proposalsSupport management during negotiation and finalization of contractsTechnical & Commercial CoordinationLiaise with design, planning, QA/QC, and project teamsReview subcontractor and supplier quotations for compliance and cost efficiencyPrepare cost comparison statements and vendor evaluationsMaintain estimation databases and historical cost recordsAssist in variation pricing, change orders, and claims when required

Sales Engineer - Building & ConstructionLITCO, a Steel Fabrication company, is searching for a Sales Engineer to join our Building & Construction team. You will be responsible for developing business with various general contractors, engineers, architects, owner’s reps and property owners within their prospective market. This person will gain continuous market knowledge, trends and information to feed to the company. This position will be a true contributor to the growth of the company and provide the talent that will make this company successful. This requires an individual who is highly motivated, a team player with strong inter-personal and organizational skills, effective attention to detail, the ability to problem solve, juggle multiple projects, and adjust work accordingly. This position also requires a general knowledge of Steel & Architectural Fabrication and installation .RESPONSIBILITIES:Develop new business accounts and expand existing customer relationships to secure major construction contracts.1.Utilizes strategic account planning and sale pipeline management tools2. Follows a proven sales process that includes prospecting, qualifying, targeting, identifying customer needs, developing value propositions, presenting solutions and alternatives, and closing the sale for future construction project opportunities3. Works collaboratively with operations team to implement strategic plans to generate business opportunities, which result in achieved revenue objectives for the company.4. Maintains knowledge of marketplace issues, industry trends, competitive information, customer expectations, public policy and other market drivers5. Makes decisions based on LITCO long-term growth philosophy and core values6. Participates in industry and community organizations and serves as a brand ambassador throughout the community7.Reviewing and approving information for prequalification for projects.8.Participating in pursuit teams.9.Liaises with the Proposal/Marketing team and Estimating as required.10. Participating in the evaluation and planning of all sales and marketing activities, including identifying and prequalifying leads, working on procurement strategies, developing proposals for RFPs/RFQs, closing deals, and negotiating contracts.11.Qualifying project opportunities and identifying high-potential clients using a disciplined Go/No-Go approach and strategic account management techniques.12. Providing reports and updates to senior management as required.13. Using tact to promote, develop, and maintain relationships with vendors, owners, architects, government officials, and the general public.14. Logging and tracking client relationships through Client Relationship Management (CRM) software.15. Developing and maintaining strong, customer-focused relationships with key stakeholders and decision makers.16.Relationship development of targeted developers, architects, and market influencers in the local market. Making cold calls as required to obtain essential information or make initial contact.17.Supporting the analyzing and utilizing district goals, department needs, market conditions, and trends to assist in guiding the strategic plan and securing new work.Other duties as required.18. Prepares sales engineering reports by collecting, analyzing, and summarizing sales information and engineering and application trends.19.. Submits orders by conferring with technical support staff and costing engineering changes.20. Great communication in Developers, consultants & Main Contractors.21. Develops negotiating strategies and positions by studying integration of new venture with company strategies and operations; examining risks and potentials; estimating partners’ needs and goals.22. Closes new business deals by coordinating requirements; developing and negotiating contracts; integrating contract requirements with business operations.

We are seeking a highly skilled BIM Modeller with strong experience in steel fabrication projects and proven GCC project exposure. The selected candidate will play a key role in developing accurate BIM models, supporting fabrication and erection activities, and coordinating with multidisciplinary project teams.Key ResponsibilitiesDevelop and maintain detailed 3D BIM models for structural steel projectsPrepare General Arrangement (GA), shop, and fabrication drawings in accordance with project specificationsCoordinate closely with structural engineers, fabrication workshops, and site erection teamsPerform clash detection and model coordination to identify and resolve design conflictsUpdate BIM models based on RFIs, design revisions, and site requirementsGenerate material take-offs and steel quantities from BIM modelsEnsure all drawings and models comply with project standards, client requirements, and international codesSupport fabrication planning and erection sequencing through accurate modelingMaintain organized BIM documentation and follow company BIM standards

We are looking for an experienced Foreman with a solid background in steel structure erection work, capable of supervising site teams and ensuring smooth and safe project execution.Supervise and manage daily steel structure erection activities including columns, rafters, beams, bracings, platforms, handrails, and cladding.Allocate and manage manpower (fitters, fabricators, welders, helpers, riggers, etc.).Coordinate with Site Engineers, Project Engineers, and crane operators for work sequence and lifting activities.Ensure all erection work is carried out as per approved drawings, method statements, and safety standards.Check alignment, leveling, bolt tightening/torquing, and ensure quality of installation.Prepare daily progress updates and report site issues promptly.Maintain site discipline and ensure workers follow HSE guidelines.Assist in inspections (WIR/MIR) and coordinate with QA/QC teams.Solve on-site issues to avoid delays and maintain productivity.

We are looking for an experienced Site Engineer with a strong background in steel structure erection, installation, and site execution. The ideal candidate must be capable of independently handling site activities and coordinating with contractors, manpower, and project teams.Supervise steel structure erection works, including columns, rafters, beams, bracings, handrails, platforms, and cladding.Coordinate with site teams, foremen, fabricators, and crane operators for smooth site operations.Ensure site execution as per approved drawings, method statements, and safety standards.Monitor daily site progress and prepare progress reports, WIRs, MIRs, and inspection requests.Ensure adherence to project schedules and resolve any on-site technical issues.Verify dimensions, alignment, bolt tightening (torque), and final installation quality.Liaise with consultants/client representatives for inspections and approvals.Coordinate with QA/QC and HSE teams for safe execution.Manage manpower allocation and ensure productivity.

Create 3D structural models using Tekla Structures with accurate detailing for fabrication and erection.Prepare GA drawings, shop drawings, assembly drawings, bolt lists, and material take-offs.Review and interpret architectural and structural drawings and convert them into detailed fabrication models.Coordinate with Design, Production, QC, and Site teams to ensure design accuracy and buildability.Manage revisions and implement design changes efficiently within project timelines.Support the engineering team during fabrication and site execution with technical clarifications.Maintain company standards, drawing templates, and detailing accuracy in line with international codes (AISC / BS / ASTM).

Prepare cost estimates, quotations, and tender submissions for steel fabrication projectsReview project specifications, drawings, and client requirementsCoordinate with procurement and engineering teams for material and pricing detailsAnalyze labor, material, and time requirements to determine project costsMonitor ongoing projects to ensure estimated vs. actual cost alignmentMaintain relationships with suppliers and subcontractors for updated pricing

l Carry out inspection of raw materials, in-process fabrication activities, and final fabricated items.l Verify materials against Material Test Certificates (MTCs) and ensure compliance with specifications.l Conduct visual inspections of welds, dimensional checks, and alignment verification.l Ensure compliance with approved Welding Procedure Specifications (WPS) and project standards.l Monitor welder performance and ensure valid welder qualifications (WQTs) are in place.l Prepare and maintain Inspection Reports, Checklists, and Non-Conformance Reports (NCRs).l Assist in developing and executing Inspection Test Plans (ITPs) and Quality Control Plans.l Coordinate with the QA/QC Engineer, production team, and project team for quality-related matters.l Participate in internal and external audits and inspections.l Follow up and verify corrective actions for any identified quality issues.l Ensure all inspection tools and equipment are calibrated and maintained properly.

IMMEDIATE JOINER NEEDED - RIYADH - KSAJob Responsibilities:Perform MIG welding (Metal Inert Gas) on mild steel, stainless steel, and other metals as per project requirements.Read and interpret engineering drawings, blueprints, and welding symbols.Prepare and set up welding equipment, tools, and materials for daily operations.Conduct welding work ensuring high quality, accuracy, and durability.Inspect welds and perform rework or repairs as necessary.Maintain a clean and safe work environment following company safety standards.Collaborate with supervisors and team members to meet project deadlines.Requirements:Proven experience as a MIG Welder (minimum 2–3 years preferred).Ability to read and understand technical drawings and measurements.Knowledge of welding techniques, materials, and equipment handling.Certification in welding (if applicable) will be an added advantage.Physically fit and capable of working in different environments (indoor/outdoor).Strong focus on safety and quality standards.

Supervise and coordinate all on-site steel structure fabrication and erection activities.Review and interpret construction drawings and specifications.Ensure compliance with project schedule, safety, and quality standards.Coordinate with project managers, site teams, and subcontractors.Monitor site progress and prepare daily/weekly site reports.Conduct site inspections to ensure adherence to engineering and safety standards.Resolve technical issues and provide engineering support on-site.Manage manpower, equipment, and material allocation efficiently.Ensure strict adherence to HSE (Health, Safety & Environment) guidelines.

The Structural Fabrication Foreman is responsible for supervising and coordinating daily operations in the structural steel fabrication shop or site. This includes overseeing fabrication of steel components, ensuring work is carried out as per drawings and specifications, maintaining quality and safety standards, and supporting timely delivery of project milestones.

We are seeking experienced Welders (3G) to join our team in the Kingdom of Saudi Arabia. The ideal candidate should have expertise in 3G welding techniques and a solid understanding of welding processes in industrial settings.

Fabrication and Assembly: Construct aluminium frames, structures, and components according to engineering drawings and specifications.Cutting and Shaping: Operate machinery and hand tools to cut, shape, and bend aluminium sheets and profiles.Welding and Joining: Utilize welding techniques (MIG, TIG) to join aluminium parts and ensure structural integrity.Quality Control: Inspect fabricated products to ensure they meet quality standards and specifications.Safety Compliance: Adhere to safety protocols and standards while working with machinery and handling materials.Team Collaboration: Work closely with engineers, designers, and other fabricators to achieve project goals and deadlines.

We are seeking a dedicated and experienced Site Engineer with a strong background in steel fabrication to join our dynamic team in KSA. The ideal candidate will oversee on-site execution, ensure quality and safety compliance, and coordinate all aspects of fabrication and installation activities.

We are seeking a skilled MIG Welder to join our team in the vibrant steel fabrication industry. As a MIG Welder, you will be responsible for welding and fabricating steel components according to technical drawings and specifications. The ideal candidate should possess strong welding skills, attention to detail, and a commitment to quality craftsmanship.

Fabricate and assemble steel structures and components by reading and interpreting engineering drawings and blueprints.Measure, cut, and weld metal components using various welding techniques (e.g., MIG, TIG).Operate and maintain fabrication tools and equipment, ensuring safety and efficiency.Inspect and test assembled structures to ensure they meet project specifications and quality standards.Collaborate with engineers, designers, and other team members to solve fabrication issues and improve processes.Maintain a clean and organized work area, adhering to safety and environmental regulations.

We are looking for a reliable and hardworking Cleaner to maintain cleanliness and hygiene in our facilities. The ideal candidate will ensure that all office areas are clean, orderly, and presentable at all times.

We are seeking a skilled Quantity Surveyor with a minimum of 4 years of experience in steel fabrications to join our team in the UAE. The ideal candidate will be responsible for managing all aspects of cost estimation, budgeting, procurement, and contractual negotiations related to steel fabrication projects.Key Responsibilities:Conducting cost estimation and budget preparation for steel fabrication projects.Analyzing project specifications and preparing accurate quantity take-offs.Evaluating subcontractor quotations and negotiating contracts.Monitoring project progress to ensure adherence to budgetary constraints.Collaborating with project managers and engineers to optimize project costs and schedules.Providing timely financial reports and forecasts to management.

We are looking for a skilled CNC Machine Operator with experience in steel fabrication to join our manufacturing team. The ideal candidate will be responsible for setting up and operating CNC machines to cut, drill, or shape structural steel components according to technical drawings and project requirements.

Company Overview: We are a leading company specializing in steel fabrication structures, serving diverse industries across the UAE. Committed to quality and innovation, we are expanding our team and seeking a dynamic Production Manager to oversee our manufacturing operations.Responsibilities:Manage and optimize the production process for steel fabrication structures from start to finish.Ensure adherence to project timelines, budgets, and quality standards.Coordinate with engineering, procurement, and construction teams to streamline workflows.Supervise and motivate production staff, fostering a culture of safety, efficiency, and continuous improvement.Implement and enforce best practices in manufacturing processes and equipment maintenance.Monitor inventory levels and procurement of materials to support production schedules.Collaborate with project managers and clients to ensure project requirements are met.

Job Summary: Senior Site EngineerKey Responsibilities:- Lead the planning and implementation of projects- Maintain control on costs, quality and time lines- Facilitate the definition of project scope, goals and deliverables- Define project tasks and resource requirements- Develop full scale project plans- Assemble and coordinate project staff- Manage project budget, resource allocation, schedules, quality assurance- Track project deliverables using appropriate tools- Provide direction and support to project team and monitor / report on progress of the project to all stakeholders Project/Site Related:· -Responsible for raising inspections at Site like WIR ( Work inspection report) and MIR (Material Inspection Report) and getting it approved from the Consultant.- Maintain site E.H.S. procedures and policies.- Ensure accurate setting out of works in accordance with contract drawings or approved shop drawings.· Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.· Ensuring that all materials used and work performed are as per specifications.· Overseeing the selection and requisition of materials.· Monitoring and interpreting the design and drawings supplied by the client.· Liaising with any consultants, subcontractors, supervisors, quantity surveyors and the general workforce involved in the project.· Planning the work and efficiently organizing the site facilities in order to meet agreed deadlines.· Responsible for Overseeing quality control and health and safety matters on site.· Preparing reports as required.· Checking materials and work in progress for compliance with the specified requirements.· Observance of safety requirements.· Quality control in accordance with approved method statements, quality plans and inspection and test plans, all prepared by the project management team and by subcontractors.· Providing data in respect of variation orders and site instructions.· Preparing record drawings, technical reports, site diary.· Organize operations with Engineers and Supervisors.· Liaise with General Foreman and Junior Engineer in respect of field problems, technical matters and site safety.· Initiation of Technical queries and managing Verbal Instructions.· Ensure preparation of Method Statements, Inspection & Test Plan, as the work schedule requires, and ensure matters of site safety are incorporated as a priority or KPI.· Provide technical assistance and technical supervision.· Progress measurement and reporting.· Monitor the work and report the progress, and any occurrences, which might create a delay or variation in the specified work.

The Lead Steel Structural Design Engineer is responsible for overseeing the design, analysis, and implementation of steel structures for construction projects. This role involves managing a team of engineers, ensuring compliance with industry standards, and coordinating with other disciplines to deliver high-quality structural solutions.